Model No.: TD75 DTII
Model Number: TD75 DTII
Roller Bearing: Ball Bearing 6204,6205,6305
Seal: Labyrinth Seal
Roller Material: Seamless Roller Pipe,welded Roller Pipe
Rolelr Diameter: 50mm-219mm
Roller Length: 190-3400mm
Packaging: 1)Neutral package & wooden package 2)Carton package+pallet 3)Wooden package+pallet 4)As customer request
Productivity: 50000 Pieces/day
Place of Origin: Shandong, China
Supply Ability: 50000 Pieces/Day
Transition idlers are mounted at either end of the conveyor, near the head and tail pulleys. and are available in 3 or 5 rolls to suit required belt width. Used on the carry side of the conveyor to support the conveyor belt as it goes from trough to flat position. The most parts of idler is bearings, we provide unique high quality deep groove Ball Bearing, with thicker inner and outer rings.
The reason for this is that the conveyor belt is flat as it passes over the pulleys, under high tension. As the belt changes its form to a full trough of say, 35 degrees (i.e. from Tail Pulley to full trough angle), the belt must be supported through this transition zone. If the belt was fed directly into a full trough from the tail pulley, the belt edges would be over-stressed and damage would result. Similarly, as the troughed angle changes to zero at the head- end, transition idlers provide support through the transition zone. The number of transition idlers required depends on the trough angle of the conveyor.
|Conveyor Transition Idler 10/20/35 Degree For Quarry|
|Materials||Steel, Stainless steel, Nylon, ceramic,PVC-|
|Bearing||Deep Groove Bal Bearing 6204,6205,6305,6206,6306|
|Life time||30,000hours to 50,000hours|
|Standard|| DIN/CEMA/JIS/ISO/ETC/GB |
|Painting||Ordinary painting, hot galvanized painting, electric static|
|Shaft||45# steel(GB) equal to C45(DIN)|
|Tube||Carbon steel, Q235 steel pipe|
|Application||Coal mining industry, cement, steel, harbor etc|
| || |
1)Steady running, reliable quality and reduce maintenance;
2)Less movement longitudinally, rotating smoothly, extends the life span;
3)Various bearing housing and sealing structure are available for the customer's choice;
4)Multi pass labyrinthine sealing, preventing the mixed dirt and water immersed;
5)Manufacturing by steel pipe especially for of high precision Roller , ensuring the strong load, low shaking and less noise.
The other side
2.Fertilizer, Salt, Sugar, Pulp Paper, Acid and Alkaline, etc.
4.Coal Mining, Cement, Concrete, Limestone and Quarry, etc.
6.Port and logistics
Special: XKTE - Ball Bearings and Rolling Bearings in Conveyor Technology
XKTE is the specialist in rolling bearing technology for the mechanical application of continuous conveyors.
Whether bulk or general cargo conveyor, we have the right solutions for your requirements. Application-optimized rolling bearings from XKTE master all challenges: Heavily different temperatures, moisture, dust, dirt, as well as noise and vibration reduction.
For idler roller:
Unique Design Seize-Resistant Deep Groove Ball Bearings: 6200 series-6300 series
1. KA/TN/TN9 nylon retainer Type
2. Open Type
3. Sealed Type
4. CSK series One Way Clutch Bearing
Other Main Products for idler:
6200/6300 series Deep Groove Ball Bearing
6200/6300 series ball bearings are well suited for low to heavy radial loads and can be configured for various application speeds and running precision requirements. Reinforced iron Retainer, Super-finished deep groove, smooth race, thicker inner and outer ring.
6200/6300 Series Deep Groove Ball Bearing Model Bore Size(mm) Outer Diameter(mm) High(mm) Weight(kg) ball no. Cr(kN) Cor(kN) 6204 20 47 14 0.106 8 12.8 6.65 6205 25 52 15 0.128 9 14 7.85 6305 25 62 17 0.232 7 20.6 11.3 6306 30 72 19 0.346 8 26.7 15 6307 35 80 21 0.457 8 33.4 19.3 6308 40 90 23 0.639 8 40.8 24 6309 45 100 25 0.837 8 52.8 31.8 6310 50 110 27 1.082 8 61.8 38 Material Chrome Steel GCr15
6200/6300 Series Deep Groove Ball Bearing
Material Chrome Steel GCr15
We will consider all the applicable variables in your application, such as extreme temperature variation, dust and dirt, as well as noise and vibration requirements. Professional Conveyor Bearing Manufacturer for Conveyor Idler Roller, Impact Idler , Troughing idler and pulley bearing for Bend Pulley, drive pulley etc.
Shandong Xinkaite Bearing Co., Ltd. is a professional belt Conveyor Roller bearing manufacturer enterprise, specialized in manufacturing bearings for the bulk material handling industry and supply all kinds of Conveyor Idler Components. our bearings are being used in multiple applications including: mining machinery, carrying idlers and reverse rollers as well as drum pulley. Our factory is located in Yandian of Liaocheng in mainland China, covered an area of 18,000 square meters, registered trademarks "XKTE".
And there are many long-term fixed partners of ours within the areas centered by Conveyor Roller Bearing industry. With our company`s gradually growing, from the rough to the bearing, we set up a one-stop production line, with 50000 pieces produced every day on our automated production lines. all products are manufactured according to GB standards or in compliance with your specific requirements.
1. Volume production and large Inventories, stable quality
2. OEM is supported
3. Small order accept
4. Various Brands
5. Wide Array of Applications
6. Fast delivery
7. Our company insists on the "quality first, credit first" business ideas and our product specification is well-founded. We have a good reputation in the international market by our perfect service and sufficient supply.Packing
Copyright © 2020 Shandong Xinkaite Bearing Co., Ltd. All rights reserved.