Model No.: 6307 TN C3
Aligning: Non-Aligning Bearing
Rows Number: Single
Load Direction: Radial Bearing
Material: Chrome Steel GCr15
Precision Rating: P0 P6 P5 P4
Cage: Reinforced KA Nylon
Sealed Type: RS/2RS RZ/2RZ
Lubrication: Great Wall Grease(SINOPEC)
Bore Diameter: 35mm
Outside Diameter: 80mm
Packaging: 1)Neutral package & wooden package 2)Carton package+pallet 3)Wooden package+pallet 4)As customer request
Productivity: 50000 Pieces/day
Place of Origin: Shandong,China
Supply Ability: 50000 Pieces/Day
HS Code: 8482102000
Polyamide Cage Bearing 6307 is Open Deep Groove Ball Bearing with reinforced nylon/PA cage. Polyamide Cage Bearing has good seize-resistant performance. It is usually used in mining machinery, quarrying sector, and many other harsh environment. It has good anti-static performance in the underground . It is best cost-effective ball Bearing For Conveyor Idler Roller .
The selection of nylon/polyamide cage is crucial to Ball Bearing , while the material of nylon cage must be pure and has enough toughness and strength, because the cage will get very soft if it is made of bad material or mixed material, thus to make no anti-stuck performance within the bearing. To get safety certificate for coal mining products must use Nylon Cage Bearing.
XKTE - Ball Bearings and Rolling Bearings in Conveyor Technology
XKTE is the specialist in rolling bearing technology for the mechanical application of continuous conveyors.Special: Our KA(Nylon retainer) series bearings Obtained MA certification, safety certificate of approval for mining products (rollers) in China. With good performance of anti-seize and anti-static.
Feature of our Conveyor Idler Roller Bearing (Unique Design for Mining conveyor):
1. reinforced nylon retainer, it has good low noise properties and better sliding characteristics
2. very good corrosion resistance
3. a wide temperature range
4. Product tested by National Coal Science Institute and Provincial Quality Inspection Center. mining standard in China.
5. Good toughness and strength, good anti-seize performance, constantly used in dusty environment and underground environment.
The design of Ductile crown structure of retainer can effectively remove stuck dust objects
Super Finished Surface Technology
Dimensions such as the outer and inner diameters and the width are ground to micrometer (one-thousandth of a millimeter) precision, as is the groove, a key internal structure formed between the inner and outer rings in which balls run.
Thicker Inner & Outer Ring
The ring is the main part and the important part of the Idler Roller Bearing. Best idler Roller Bearing has deep groove ball, and large clearance. But deep groove doesn`t mean to dig the channel with a simple way of enlarge the steel ball. The thickness of the bearing is certain, so to get the ball big and the groove deep will shorten service life. Our XKTE bearing uses way of thickening ring to get the standard of deep groove and large clearance, improves the anti-stuck performance, and effectively increases the service life.
Other Main Products for idler:
6200/6300 series Deep Groove Ball Bearing
6200/6300 series is well suited for low to heavy radial loads and can be configured for various application speeds and running precision requirements. Reinforced iron Retainer, Super-finished deep groove, smooth race, thicker inner and outer ring.
6200/6300 Series Deep Groove Ball Bearing Model Bore Size(mm) Outer Diameter(mm) High(mm) Weight(kg) ball no. Cr(kN) Cor(kN) 6204 20 47 14 0.106 8 12.8 6.65 6205 25 52 15 0.128 9 14 7.85 6305 25 62 17 0.232 7 20.6 11.3 6306 30 72 19 0.346 8 26.7 15 6307 35 80 21 0.457 8 33.4 19.3 6308 40 90 23 0.639 8 40.8 24 6309 45 100 25 0.837 8 52.8 31.8 6310 50 110 27 1.082 8 61.8 38 Material Chrome Steel GCr15
6200/6300 Series Deep Groove Ball Bearing
Material Chrome Steel GCr15
Nylon cage bearing: 6204KA---6308KA 6204KA/C3---6308KA/C3 6204KA/C4---6308KA/C4
Rubber Sealed bearing: 6204-2RS/RS---6310-2RS 6204-2RZ---6310-2RZ 180204---180308
Shielded Ball Bearing: 60204---60310 6204KA-Z---6308KA-Z 6204TN-Z---6308TN-Z 6204ZZ---6310ZZ
1. Volume production and large Inventories, stable quality
2. OEM is supported
3. Small order accept
4. Various Brands
5. Wide Array of Applications
6. Fast delivery
7. Our company insists on the "quality first, credit first" business ideas and our product specification is well-founded. We have a good reputation in the international market by our perfect service and sufficient supply.
Shandong Xinkaite Bearing Co., Ltd. is a professional belt Conveyor Roller Bearing manufacturer enterprise, specialized in manufacturing bearings for the bulk material handling industry. our bearings are being used in multiple applications including: mining machinery, carrying idlers and reverse rollers as well as drum pulley. Our factory is located in Yandian of Liaocheng in mainland China, covered an area of 18,000 square meters, registered trademarks "XKTE".
To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.
Copyright © 2020 Shandong Xinkaite Bearing Co., Ltd. All rights reserved.